Guardian Hardware Pipeline

Node: lantern-print | --:--:--

Generating PCB

Starting...
PCB Project WorkflowReview-only • CNC handoff disabled
Follow the numbered stages from left to right. The highlighted stage is the next safe action for the selected job. AI design intake starts with a Markdown document, and the AI Assistant stays available on the right for questions, diagnostics, and evidence guidance. This dashboard cannot start a cut.
Start a PCB projectImport a design document or load the known-good smoke test to begin.
Known-good sample walkthrough
Run a read-only checklist from design document through review-only G-code. It never starts CNC.
PCB review worker readiness
Checks the reproducible KiCad/FreeRouting prerequisites without SSH, CNC, or fabrication.
Imported worker packages
Browse hash-verified lantern-print evidence in a separate read-only store.
Current stepNo job selected
Import a design document or load the known-good smoke test. This panel will explain the required checks, evidence, and button for every stage.
  1. Start with + New Design, then select the new job in the queue.
Jobs 0
--
Select a job to view its design
AI Assistant
Grounded assistant: answers use the active job, parser logs, contracts, inventory, and registered sources. Missing evidence is reported rather than guessed.
Permission-gated Design Document edit The assistant proposes a complete replacement document first. Nothing changes until you inspect the proposal, check permission, and type the confirmation phrase. 
No proposal yet.
Automate safe qualification prep

This generates deterministic file checks and review fixtures for unresolved blocks. It does not edit the verified-block registry, mark hardware validated, or invent physical-test evidence.

Select a job, then run qualification checks.
Select a job.
Select a job.
Select a job.
Select a job.
CAM / CNC --
Status idle
Validated CAM outputsGenerate CAM after approval and setup.

Top trace isolation

Removes copper around top-layer traces. Verify isolation width, passes, feed, plunge, spindle, depth, and safe Z.

Not generated

Bottom trace isolation

Optional second-sided copper program. Requires explicit bottom-layer selection and registration method.

Not generated

NC drill template

Drills plated/non-plated holes from Excellon data. Each diameter must map to an exact qualified tool.

Not generated

Board outline / cutout

Separates the finished board from stock. Requires a qualified outline profile, thickness, tabs, depth, and workholding review.

Safety-blocked
Tool-change checklist: stop spindle; confirm the next tool ID, diameter, collet, stick-out, and cutting length; load it securely; re-zero Z (and XY if registration requires it); verify safe Z and workholding; then preview the next program. No automatic tool changer or CNC dispatch is connected.
Stage 7 · CNC handoff is disabled

These controls are intentionally unavailable while we prove the PCB development and review path. After a future safety approval, this is where a reviewed sender connection and per-program handoff would appear.